2022-12-07

king

2022-12-07 f5062c2c10b26a50e9cc38bf37d02b3ce4603206

2022-12-07

 src/tabviews/zshare/actionList/printbutton/index.jsx

@@ -183,11 +183,7 @@
      // 数据选择类型校验
      this.actionSettingError()
      return
    } else if (
      !btn.verify ||
      (btn.verify.printMode === 'normal' && (!btn.verify.Template || !btn.verify.linkUrl)) ||
      (btn.verify.printMode === 'custom' && (!btn.verify.printFunc || !btn.verify.linkUrl))
    ) {
    } else if (!btn.verify || !btn.verify.printMode) {
      notification.warning({
        top: 92,
        message: '请完善打印验证信息！',
@@ -232,10 +228,20 @@
    }
  }

  triggerPrint = (data, formlist = []) => {
    const { btn } = this.props

    if (btn.verify.printMode === 'RFID') {
      this.triggerRFIDPrint(data, formlist)
    } else {
      this.triggerNormalPrint(data, formlist)
    }
  }

  /**
   * @description 触发打印
   */
  triggerPrint = (data, formlist = []) => {
  triggerNormalPrint = (data, formlist) => {
    const { btn } = this.props
    let formdata = {}
    let baseCount = 1
@@ -378,7 +384,7 @@
            param.rduri = window.GLOB.mainSystemApi
          }
    
          Api.genericInterface(param).then(result => {
          Api.getSystemCacheConfig(param).then(result => {
            result.tempId = tempId
            resolve(result)
          })
@@ -448,6 +454,109 @@
        }
      } else {
        this.execError(errorMsg)
      }
    })
  }

  /**
   * @description 触发RFID打印
   */
  triggerRFIDPrint = (data, formlist) => {
    const { btn } = this.props
    let formdata = {}
    let list = []
    
    formlist.forEach(_data => {
      formdata[_data.key] = _data.value
    })

    new Promise(resolve => {
      if (btn.intertype === 'system') { // 使用系统时，直接从表格或表单中选取数据
        if (btn.Ot === 'notRequired') {
          if (formlist.length > 0) {
            list = [formdata]
          }
        } else {
          data.forEach(cell => {
            let _cell = {...cell, ...formdata}
            list.push(_cell)
          })
        }

        resolve(true)
      } else {
        this.getprintdata(btn, data, formdata, formlist).then(result => {
          if (result.next) {
            result.list.forEach(cell => {
              // 系统打印数据，校验data字段
              if (!cell.data || cell.data.length === 0) return

              cell.data.forEach(m => {
                let _cell = {...m, ...formdata}
                list.push(_cell)
              })
            })
          }
          
          resolve(result.next)
        })
      }
    }).then(res => {
      // 获取打印模板 getTemp
      if (!res) return false

      if (list.length === 0) {
        notification.warning({
          top: 92,
          message: '未获取到打印数据！',
          duration: 5
        })
        return false
      }

      let param = {
        func: 's_PrintTemplateMGetData',
        Type: 'Y',
        // ID: tempId, // 添加模板时，保存及查询使用模板参数
        PrintTempNO: btn.verify.Template
      }

      if (window.GLOB.mainSystemApi) { // 从单点登录服务器取打印配置信息
        param.rduri = window.GLOB.mainSystemApi
      }

      return Api.getSystemCacheConfig(param)
    }).then(result => {
      if (!result) {
        this.setState({ loading: false })
        return
      }

      if (!result.ConfigParam) {
        notification.warning({
          top: 92,
          message: '未获取到打印模板信息！',
          duration: 5
        })
        this.setState({ loading: false })
      } else {
        let configParam = ''
        try {
          configParam = JSON.parse(window.decodeURIComponent(window.atob(result.ConfigParam)))
        } catch (e) {
          configParam = ''
        }
  
        if (!configParam) {
          notification.warning({
            top: 92,
            message: '打印模板解析错误！',
            duration: 5
          })
          this.setState({ loading: false })
        } else {
          this.execRfidPrint(list, configParam)
        }
      }
    })
  }
@@ -1087,48 +1196,152 @@
    }
  }

  // execRfidPrint = () => {
  //   let type = 'HF'
  //   let printparamsJsonArray = []
  execRfidPrint = (list, template) => {
    const { btn } = this.props

  //   let mm = 12
  //   if (type === 'HF') {
  //     printparamsJsonArray.push({PTK_OpenUSBPort: 255}); // 打开打印机USB端口
  //     printparamsJsonArray.push({PTK_ClearBuffer: ''}); // 清空缓存
  //     printparamsJsonArray.push({PTK_SetDarkness: 10}); // 设置打印黑度 取值范围 0-20
  //     printparamsJsonArray.push({PTK_SetPrintSpeed: 4}); // 设置打印速度
  //     printparamsJsonArray.push({PTK_SetDirection: 'B'}); // 设置打印方向
  //     printparamsJsonArray.push({PTK_SetLabelHeight: 25*mm + ","+ 10*mm +","+ 0 +","+ false}); // 设置标签高度、间隙及偏移
  //     printparamsJsonArray.push({PTK_SetLabelWidth: 60*mm}); // 设置标签宽度
  //     printparamsJsonArray.push({PTK_SetRFID: 0+","+0+","+0+","+0+","+0}); // UHF RFID打印设置
  //     printparamsJsonArray.push({PTK_RWRFIDLabel: 1+","+0+","+0+","+4+","+1+',EEBA99192945C746'});
  //     printparamsJsonArray.push({PTK_DrawText_TrueType: "50,10,36,0,微软雅黑,1,700,0,0,0,北京明科有限公司"});
  //     // printparamsJsonArray.push({PTK_DrawText_TrueType: x+","+y+","+FHeight+","+FWidth+","+FType+","+Fspin+","+FWeight+","+FItalic+","+FUnline+","+FStrikeOut+","+data});
  //     // printparamsJsonArray.push({PTK_EncodeRFIDPC:'mkA040'});
  //     printparamsJsonArray.push({PTK_PrintLabel:1+","+1});
  //     printparamsJsonArray.push({PTK_CloseUSBPort: ""}); // 关闭USB通讯端口
  //   }
    list = list.filter(item => !!item[btn.verify.valueField])

  //   let data = {
  //     reqParam: '1',
  //     printparams: JSON.stringify(printparamsJsonArray)
  //     // printparams: JSON.stringify([{PTK_OpenUSBPort: 255},{PTK_ErrorReport_USBInterrupt: 'status:'},{PTK_GetPrinterDPI: 'DPI:'},{PTK_CloseUSBPort: ''}])
  //     // printparams: JSON.stringify([{PTK_OpenUSBPort: 255},{PTK_RFIDCalibrate: ''},{PTK_CloseUSBPort: ''}])
  //   }
    if (list.length === 0) {
      notification.warning({
        top: 92,
        message: '未获取到打印数据！',
        duration: 5
      })
      this.setState({ loading: false })
      return
    }

  //   Api.postekPrint(data).then(result => {
    let width = template.width
    let height = template.height
    let gap = template.gap || 0
    let mm = 12

  //   })
  // }
    if (btn.verify.DPI === '203') {
      mm = 8
    } else if (btn.verify.DPI === '600') {
      mm = 24
    }

    let items = []
    template.elements.forEach(element => {
      if (!['text', 'barcode', 'qrcode'].includes(element.type)) return

      let _field = element.field

      if (_field === 'other_field') {
        _field = element.cusfield || ''
      }

      let item = {
        type: element.type,
        value: element.value || '',
        field: _field
      }

      if (item.type === 'text') {
        let size = Math.floor(4 * mm * (element.fontSize || 12) / 12)
        let fontWeight = 400
        if (element.fontWeight === 'bold') {
          fontWeight = 600
        } else if (element.fontWeight === 'bolder') {
          fontWeight = 800
        } else if (element.fontWeight === 'lighter') {
          fontWeight = 300
        }
        item.draw = `${element.left * mm},${element.top * mm},${size},0,${element.fontFamily || '微软雅黑'},${element.align === 'center' ? 5 : 1},${fontWeight},0,0,0,`
      } else if (item.type === 'barcode') {
        let codeType = 1
        if (element.barcodeType === 'EAN13') {
          codeType = 'E30'
        }
        let narrowWidth = element.narrowWidth || 2
        let horizontal = element.narrowWidth || 2
        let vertical = Math.ceil(element.barcodeHeight * mm)

        item.draw = `${element.left * mm},${element.top * mm},0,${codeType},${narrowWidth},${horizontal},${vertical},${element.barcodeLabel === 'true' ? 'B' : 'N'},`
      } else if (item.type === 'qrcode') {
        let r = Math.ceil(element.qrcodeWidth / 2)

        item.draw = `${element.left * mm},${element.top * mm},0,0,0,${r},0,0,8,`
      }

      items.push(item)
    })

    let ip = '192.168.1.2'
    let params = list.map(cell => {
      let array = []
      let value = cell[btn.verify.valueField]

      if (btn.verify.linkType !== 'USB') {
        array.push({PTK_Connect_Timer: `${ip},${btn.verify.port},5`}); // 打开打印机网络端口
      } else {
        array.push({PTK_OpenUSBPort: btn.verify.port}); // 打开打印机USB端口
      }

      array.push({PTK_ClearBuffer: ''}); // 清空缓存
      array.push({PTK_SetDirection: 'B'}); // 设置打印方向
      array.push({PTK_SetLabelHeight: height * mm + ',' + gap * mm + ',' + 0 + ',' + false}); // 设置标签高度、间隙及偏移
      array.push({PTK_SetLabelWidth: width * mm}); // 设置标签宽度
      array.push({PTK_SetRFID: '0,0,0,0,0'}); // UHF RFID打印设置
      array.push({PTK_RWRFIDLabel: '1,0,0,4,1,' + value});

      items.forEach(m => {
        let val = ''
        if (m.field) {
          val = cell[m.field]
        } else {
          val = m.value
        }

        if (!val && val !== 0) return

        if (m.type === 'text') {
          array.push({PTK_DrawText_TrueType: m.draw + val});
        } else if (m.type === 'barcode') {
          array.push({PTK_DrawBarcode: m.draw + val});
        } else if (m.type === 'qrcode') {
          array.push({PTK_DrawBar2D_QR: m.draw + val});
        }
      })
      
      array.push({PTK_PrintLabel: '1,1'});
      array.push({PTK_CloseUSBPort: ''}); // 关闭USB通讯端口

      return {
        reqParam: '1',
        printparams: JSON.stringify(array)
      }
    })

    this.loopRFIDPrint(params)
  }

  loopRFIDPrint = (params) => {
    let param = params.shift()

    Api.postekPrint(param).then(res => {
      if (res.retval === '0') {
        if (params.length === 0) {
          this.execSuccess({ ErrCode: 'S', message: '', ErrMesg: '打印请求已发出。', status: true })
        } else {
          setTimeout(() => {
            this.loopRFIDPrint(params)
          }, 200)
        }
      } else {
        if (res.retval === '30021') {
          res.msg = res.msg.replace(/PTK_ClearBuffer[\s\S]*/, '')
        }
        
        this.execError({ErrCode: 'N', message: res.msg})
      }
    })
  }

  execPrint = (list, template, formdata) => {
    const { btn } = this.props
    let _errors = []
    
    // if (btn) {
    //   this.execRfidPrint()
    //   return
    // }

    let defaultPrinter = btn.verify.defaultPrinter || 'lackprinter'
    let printers = {}

 src/templates/sharecomponent/actioncomponent/verifyprint/index.jsx

@@ -213,6 +213,20 @@
  changePrintMode = (e) => {
    let value = e.target.value

    if (value === 'RFID') {
      this.setState({linkType: 'USB', port: 255}, () => {
        this.props.form.setFieldsValue({
          linkType: 'USB'
        })
      })
    } else if (this.state.printMode === 'RFID') {
      this.setState({linkType: 'system'}, () => {
        this.props.form.setFieldsValue({
          linkType: 'system'
        })
      })
    }

    this.setState({
      printMode: value
    })
@@ -227,6 +241,14 @@
      if (value === 'system') {
        this.props.form.setFieldsValue({
          linkUrl: '127.0.0.1:13529'
        })
      } else if (value === 'USB') {
        this.props.form.setFieldsValue({
          port: '255'
        })
      } else if (value === 'network') {
        this.props.form.setFieldsValue({
          port: '9100'
        })
      }
    })
@@ -262,11 +284,12 @@
                      <Radio.Group onChange={this.changePrintMode}>
                        <Radio value="normal">标准</Radio>
                        <Radio value="custom">自定义</Radio>
                        <Radio value="RFID">RFID</Radio>
                      </Radio.Group>
                    )}
                  </Form.Item>
                </Col>
                <Col span={8}>
                {printMode !== 'RFID' ? <Col span={8}>
                  <Form.Item label="链接类型">
                    {getFieldDecorator('linkType', {
                      initialValue: linkType || 'system'
@@ -277,9 +300,21 @@
                      </Radio.Group>
                    )}
                  </Form.Item>
                </Col>
                </Col> :
                <Col span={8}>
                  <Form.Item label={'链接地址'}>
                  <Form.Item label="链接类型">
                    {getFieldDecorator('linkType', {
                      initialValue: linkType || 'USB'
                    })(
                      <Radio.Group onChange={this.changeLinkType}>
                        <Radio value="USB">USB</Radio>
                        <Radio value="network">网络端口</Radio>
                      </Radio.Group>
                    )}
                  </Form.Item>
                </Col>}
                {printMode !== 'RFID' ? <Col span={8}>
                  <Form.Item label="链接地址">
                    {getFieldDecorator('linkUrl', {
                      initialValue: verify.linkUrl || '127.0.0.1:13529',
                      rules: [
@@ -290,7 +325,20 @@
                      ]
                    })(<Input placeholder="" autoComplete="off" disabled={linkType === 'system'} />)}
                  </Form.Item>
                </Col>
                </Col> :
                <Col span={8}>
                  <Form.Item label={'端口'}>
                    {getFieldDecorator('port', {
                      initialValue: verify.port || '255',
                      rules: [
                        {
                          required: true,
                          message: '请输入端口!'
                        }
                      ]
                    })(<Input placeholder="" autoComplete="off" />)}
                  </Form.Item>
                </Col>}
                {printMode === 'custom' ? <Col span={24}>
                  <Form.Item label={'处理函数'} className="printFunc">
                    {getFieldDecorator('printFunc', {
@@ -306,7 +354,60 @@
                    )} 
                  </Form.Item>
                </Col> : null}
                {printMode === 'RFID' ? <Col span={8}>
                  <Form.Item label={
                    <Tooltip placement="topLeft" title="用于单位换算。">
                      <QuestionCircleOutlined className="mk-form-tip" />
                      分辨率
                    </Tooltip>
                  }>
                    {getFieldDecorator('DPI', {
                      initialValue: verify.DPI || '300'
                    })(
                      <Radio.Group>
                        <Radio value="203">203</Radio>
                        <Radio value="300">300</Radio>
                        <Radio value="600">600</Radio>
                      </Radio.Group>
                    )}
                  </Form.Item>
                </Col> : null}
                {printMode === 'RFID' ? <Col span={8}>
                  <Form.Item label={
                    <Tooltip placement="topLeft" title="需要存贮至芯片中的值，请填写对应的字段名，注意大小写。">
                      <QuestionCircleOutlined className="mk-form-tip" />
                      打印值
                    </Tooltip>
                  }>
                    {getFieldDecorator('valueField', {
                      initialValue: verify.valueField || '',
                      rules: [
                        {
                          required: true,
                          message: '请输入字段名!'
                        }
                      ]
                    })(<Input placeholder="" autoComplete="off" disabled={linkType === 'system'} />)}
                  </Form.Item>
                </Col> : null}
                {printMode === 'normal' ? <Col span={8}>
                  <Form.Item label={
                    <Tooltip placement="topLeft" title="打印列表为空时，是否提示用户。">
                      <QuestionCircleOutlined className="mk-form-tip" />
                      空值提示
                    </Tooltip>
                  }>
                    {getFieldDecorator('emptyTip', {
                      initialValue: verify.emptyTip || 'true'
                    })(
                      <Radio.Group>
                        <Radio value="true">是</Radio>
                        <Radio value="false">否</Radio>
                      </Radio.Group>
                    )}
                  </Form.Item>
                </Col> : null}
                {printMode !== 'custom' ? <Col span={8}>
                  <Form.Item label="打印模板">
                    {getFieldDecorator('Template', {
                      initialValue: verify.Template || '',
@@ -332,24 +433,7 @@
                    )}
                  </Form.Item>
                </Col> : null }
                {printMode === 'normal' ? <Col span={8}>
                  <Form.Item label={
                    <Tooltip placement="topLeft" title="打印列表为空时，是否提示用户。">
                      <QuestionCircleOutlined className="mk-form-tip" />
                      空值提示
                    </Tooltip>
                  }>
                    {getFieldDecorator('emptyTip', {
                      initialValue: verify.emptyTip || 'true'
                    })(
                      <Radio.Group>
                        <Radio value="true">是</Radio>
                        <Radio value="false">否</Radio>
                      </Radio.Group>
                    )}
                  </Form.Item>
                </Col> : null}
                {printMode === 'normal' ? <Col span={8}>
                {printMode !== 'custom' ? <Col span={8} offset={printMode === 'RFID' ? 16 : 0}>
                  <img className="legend" src={this.state.selectimg} alt=""/>
                </Col> : null }
              </Row>
@@ -360,7 +444,7 @@
              打印类型
              {verify.printerTypeList.length ? <span className="count-tip">{verify.printerTypeList.length}</span> : null}
            </span>
          } key="2">
          } disabled={printMode === 'RFID'} key="2">
            <Form {...formItemLayout}>
              <Row gutter={24}>
                <Col span={24} className="print-tip">

 src/utils/utils.js

@@ -2185,7 +2185,7 @@
      style.color = mark.color
      innerStyle = {color: mark.color}
    } else if (type === 'background') {
      style.background = mark.color
      style.backgroundColor = mark.color
      if (mark.fontColor) {
        style.color = mark.fontColor
        innerStyle = {color: mark.fontColor}

 src/views/login/index.jsx

@@ -74,6 +74,21 @@
    // 登录提交
    let res = await Api.getusermsg(param.username, param.password, false, ipAddress, city)
    if (res.status) {
      if (res.check_mob) {
        let loginWays = this.state.loginWays.filter(item => item.type === 'sms_vcode')

        if (loginWays.length > 0) {
          this.setState({loginWays: null, isDisabled: false}, () => {
            this.setState({loginWays: loginWays})
          })
          Modal.warning({
            title: '为确认是您本人操作，请使用手机短信验证码进行身份认证',
            okText: '知道了'
          })
          return
        }
      }
      
      sessionStorage.setItem('UserID', res.UserID)
      sessionStorage.setItem('LoginUID', res.LoginUID)
      sessionStorage.setItem('User_Name', res.UserName)

 src/views/printTemplate/mutilform/index.jsx

@@ -196,7 +196,7 @@
                initialValue: item.initval,
                rules: [
                  {
                    required: true,
                    required: item.required,
                    message: '请输入' + item.label + '!'
                  }
                ]

 src/views/printTemplate/option.js

@@ -268,6 +268,15 @@
      initval: config.rotate || 0,
      required: false,
      options: Rotate
    },
    {
      type: 'number',
      key: 'gap',
      label: '间隙',
      initval: config.gap || '',
      tooltip: 'RFID标签间隙。',
      min: 0,
      required: false
    }
  ]
}
@@ -637,6 +646,15 @@
      required: true
    },
    {
      type: 'number',
      key: 'narrowWidth',
      label: '单元宽度',
      initval: item.narrowWidth,
      tooltip: '注：RFID条码单元宽度，默认值为2。',
      precision: 0,
      required: false
    },
    {
      type: 'select',
      key: 'background',
      label: '背景色',

 src/views/systemfunc/sidemenu/config.jsx

@@ -41,8 +41,8 @@
    MenuName: '标签页管理',
  }, {
    src: '',
    PageParam: {OpenType: 'newtab', Template: 'CommonTable'},
    type: 'CommonTable',
    PageParam: {OpenType: 'newtab', Template: 'BaseTable'},
    type: 'BaseTable',
    MenuID: '1578900109100np8aqd0a77q3na46oas',
    MenuNo: 'sPrintTemplateM',
    MenuName: '标签打印模板',